APPLICATION AND USE. Preparation. Use in accordance with the standard Global Yacht specifications. All surfaces to be coated should be. Interline Glass Flake Vinyl Ester. Consult your International Paint representative for the system best suited for the surfaces to be protected. International Interline is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.
|Published (Last):||12 October 2015|
|PDF File Size:||9.63 Mb|
|ePub File Size:||12.13 Mb|
|Price:||Free* [*Free Regsitration Required]|
This product is no longer in stock. Please ensure you refer to all datasheets for full application information. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. Material is supplied in 2 containers as a unit. The question has been correctly sent. It is good working practice to periodically flush out spray equipment during the course of the working day.
Store in dry, shaded conditions away from sources of heat and ignition. It is integline responsibility to read the Product Data Sheets available below before you place an order and prior to application of the product. Once units of paint have been mixed they should not be resealed and it is advised that after unterline stoppages work recommences with freshly mixed units. Consult your local International Paint representative for specific recommendations.
Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet. The figures stated above are approximate.
International Interline – Rawlins Paints
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits inteerline to protect against toxic or oxygen deficient hazards. Marine Coatings Marine chemicals Marine lubricants.
Subject to re-inspection thereafter. Keep fluid lines as short as possible and use Teflon Packings. Remove filters from gun and pump. Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Apply in good weather. The content of this website is our best recommendation and is not advice.
International Interline 955
Always mix a complete unit in the proportions supplied. This product must NOT be thinned as the use of thinners may severely inhibit the curing mechanism of the coating.
Once the unit has been mixed, it must be used within the working pot life specified. This product is no longer in stock White. International International Interline is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance. When used in non-marine applications, different overcoating intervals apply – refer to the International Protective Coatings Interline datasheet.
As application, environmental and design factors inherline vary significantly, due care should be exercised in the selection, verification of performance and use of the coating. Do not exceed pot life limitations.
If oxidation has occurred between blasting and application of Interlinethe surface should be reblasted to the specified visual standard. Fresh water wash to remove all dirt and contamination.
These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and ingerline conditions.
If a holding primer is required, please consult International Paint for a product suitable for the area of application. A surface profile of microns is interoine.
International Interline is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance. Multiple coats may be required to achieve specified film thickness.
Interline A two pack, glass flake reinforced vinyl ester tank coating. Typical Coverage per coat.